1. [root@root:/home/rhcp]# smartctl -a /dev/sde
2. smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-97-generic] (local build)
3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
4.  
5. === START OF INFORMATION SECTION ===
6. Device Model:     ST5000DM000-1FK178
7. Serial Number:    W4J1K3S5
8. LU WWN Device Id: 5 000c50 09c7d6af1
9. Firmware Version: CC49
10. User Capacity:    5,000,981,078,016 bytes [5.00 TB]
11. Sector Sizes:     512 bytes logical, 4096 bytes physical
12. Rotation Rate:    5980 rpm
13. Device is:        Not in smartctl database [for details use: -P showall]
14. ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
15. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
16. Local Time is:    Tue Oct 17 18:45:39 2017 EDT
17. SMART support is: Available - device has SMART capability.
18. SMART support is: Enabled
19.  
20. === START OF READ SMART DATA SECTION ===
21. SMART overall-health self-assessment test result: PASSED
22.  
23. General SMART Values:
24. Offline data collection status:  (0x82) Offline data collection activity
25.                                         was completed without error.
26.                                         Auto Offline Data Collection: Enabled.
27. Self-test execution status:      (   0) The previous self-test routine completed
28.                                         without error or no self-test has ever
29.                                         been run.
30. Total time to complete Offline
31. data collection:                (   96) seconds.
32. Offline data collection
33. capabilities:                    (0x7b) SMART execute Offline immediate.
34.                                         Auto Offline data collection on/off support.
35.                                         Suspend Offline collection upon new
36.                                         command.
37.                                         Offline surface scan supported.
38.                                         Self-test supported.
39.                                         Conveyance Self-test supported.
40.                                         Selective Self-test supported.
41. SMART capabilities:            (0x0003) Saves SMART data before entering
42.                                         power-saving mode.
43.                                         Supports SMART auto save timer.
44. Error logging capability:        (0x01) Error logging supported.
45.                                         General Purpose Logging supported.
46. Short self-test routine
47. recommended polling time:        (   1) minutes.
48. Extended self-test routine
49. recommended polling time:        ( 613) minutes.
50. Conveyance self-test routine
51. recommended polling time:        (   2) minutes.
52. SCT capabilities:              (0x3035) SCT Status supported.
53.                                         SCT Feature Control supported.
54.                                         SCT Data Table supported.
55.  
56. SMART Attributes Data Structure revision number: 10
57. Vendor Specific SMART Attributes with Thresholds:
58. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
59.   1 Raw_Read_Error_Rate     0x000f   111   100   006    Pre-fail  Always       -       31156728
60.   3 Spin_Up_Time            0x0003   094   092   000    Pre-fail  Always       -       0
61.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       21
62.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
63.   7 Seek_Error_Rate         0x000f   086   060   030    Pre-fail  Always       -       405139315
64.   9 Power_On_Hours          0x0032   093   093   000    Old_age   Always       -       6178
65.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
66.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       20
67. 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
68. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
69. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
70. 188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       4295032833
71. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
72. 190 Airflow_Temperature_Cel 0x0022   070   063   045    Old_age   Always       -       30 (Min/Max 29/35)
73. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
74. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       8
75. 193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       305
76. 194 Temperature_Celsius     0x0022   030   040   000    Old_age   Always       -       30 (0 22 0 0 0)
77. 195 Hardware_ECC_Recovered  0x001a   111   100   000    Old_age   Always       -       31156728
78. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
79. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
80. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
81. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       6117 (130 175 0)
82. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       10812573392
83. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       94585584903
84.  
85. SMART Error Log Version: 1
86. No Errors Logged
87.  
88. SMART Self-test log structure revision number 1
89. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
90. # 1  Short offline       Completed without error       00%      5680         -
91. # 2  Short offline       Completed without error       00%      4936         -
92.  
93. SMART Selective self-test log data structure revision number 1
94.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
95.     1        0        0  Not_testing
96.     2        0        0  Not_testing
97.     3        0        0  Not_testing
98.     4        0        0  Not_testing
99.     5        0        0  Not_testing
100. Selective self-test flags (0x0):
101.   After scanning selected spans, do NOT read-scan remainder of disk.
102. If Selective self-test is pending on power-up, resume after 0 minute delay.
103.  
104. [root@root:/home/rhcp]#